NEW PRODUCT AUTHENTICATE CERTIFICATE OF JILIN PORVINCE

　

Certificate Number: 9510003

　

　

PRODUCT NAME: IDENTIFICATION SYSTEM OF MOVING VIHICLE

　

Accomplished by: KEYUAN Computer Design and Application Company,

Changchun(Subscribed by HUAYIN Company, Changchun)

Jilin University of Technology

Type of Authentication: New Product

Method of Authentication: The Conference of Experts

Authenticated by: Science and Technique Committee of Jilin Province

Date: Oct.27, 1995

　

Form Made by Economic and Trade Committee of Jilin Province

　

　

. Overview of the Product and Main Technique Characteristics:

This product can automatically identify moving vehicles through the combination of digital signal processing and computer engineering technique.

Technique Characteristics:

1). Range of Temperature: -40≧--80≧

2). Relative Moisture: ＋85%

3). Power Volt: 220V＼5%

4). Operation Time: 24 hours/day

5). Smallest Identify Length: ＋ 10cm (Linear length)

6). Compression Rate Based on VQ Theory: >250

7). Consumption Power: About 100W

. Comparison with Other Products Oversea and in China:

In the developed nations, they used the Identification System of Moving Vehicles which made by ELSYDEL Company in France, Tri-lozenge Company in Japan, Technique and Project Company in Singapore, PREMID Company in England, and SHENTONG Computer Company in Taiwan. These systems can be classified into 4 types: 1. Identification based on vehicle weight. 2. Identification based on the length of front and rear wheels. 3. Identification based on vehicle image edge. 4. Identification based on reflects information of card. Currently in China, the companies that related to this project are all the agents of above companies. Thus they have no own product.

Due to the complexity of vehicle types in China, those products can not meet the requirement of practical use in China. The more important reason is that except the image edge method used by ELSYDEL Company, other methods are all typical method, and can not identify the types of vehicle correctly. This new product used the modern image processing technique and applied them based on the real conditions of China. Thus this new product is advanced in China and in the world.

　

　

Economic and Market Benefit Preview:

This product can take place of the imported products. Nearly 10,000,000 US$ can be saved if this product is used on 10 highways which each has 10 entrance and exit stations. Currently, some highways in China have been using the above imported products. However none can work correctly. It is a big waste.

According to the development of Chinese economy, there will be a lot of highway to be built. Thus this new product will have a good market in China. Additionally, due to the modern image processing technique used in this product, its price is lower and quality is better than those imported products. Thus the product can have a powerful potency to be used all over the world.

Identification System of Moving Vehicle will develop with the development of Highway. So the future of this product is good.

. Index of Main Documents and The Units that provided them.

　

System Design Report

Technique Report

Comparison Report (between this product and other similar product)

Economic and Social Result Analysis Report

Application Report

Experiments Report (By New Product Authenticate Institute of Jilin Province)

The Manual of Identification System of Moving vehicle

Economic Calculation File

Technique File of Identification System of Moving Vehicle

Produce Processing File of Identification System of Moving Vehicle

Corporation Standard File of Identification System of Moving Vehicle

New Products Searching Report

　

　

. Authenticate Result:

　

Assigned by Industrial Committee of Jilin Province. Authenticate Committee carefully listened and read all the reports by project members on Identification System of Moving Vehicle. Authenticate Committee carefully listened and read the report of experiments by New Product Authenticate Institute of Jilin Province, and the Application Reports of Siping South Exit Fee-getting Station and Shengli Bridge Fee-getting Station. After the function test of Identification System of Moving Vehicle, Authenticate Committee made decision below:

  1. The product had all technical and produce documents that required producing the product. Thus it can be used in real producing process.
  2. The device and technique potency of the company can offer the advice of production of this new product.
  3. Accept the report of New Product Authenticate Institute of Jilin Province. The new product reached the criterion of Industrial requirement (Q-CK001-95). The new product can meet the requirement of practical use in China.
  4. Advanced Nonlinear VQ Image Compression Method is used in the new product to store the standard vehicle image. When it is restored, only the characteristic part of image will be restored. Using the absolute error algorithm to match the image of moving vehicle. The system can provide the correct type of vehicle. The product is original in China.
  5. The new product meets the requirement of practice using of identification of moving vehicle in China.

Agree on ＾Identification System of Moving Vehicle￣ passing the authentication and it can be made as a product.

　

Chairman of Authenticate Committee: Wang Ruiguang

(signature)

Date: Oct. 27, 1995

　

. Authenticate Unit Decision:

　

Accept the Decision of Authenticate Committee

　

The Authenticate Seal of Industrial Committee of Jilin Province

(Seal)

　

Date: Oct.30 1995

　

　

. The Decision of New Product Authenticate and Ratify Committee Office of Jilin Province Government

　

Accept the Decision of Authenticate Committee

　

The Seal of New Product Authenticate and Ratify Committee Office of Jilin Province Government

(Seal)

　

Date:

　

　

. Project Members

Ren Zhuang, Chen Hexin, Wang Molin, Wu Xianwei, Gao Xiangsheng

Wang Suming, Wang Guiqin, Wang Xuejun, Zhu Yanqiu, Zhang Yanfeng

　

Names of Main Unit and Assistant Unit

　

Main Unit: Keyuan Computer Design and Application Company, Changchun

Contribution: Invest, Market Survey, Produce and Sell

Assistant Unit: Jilin University of Technology

Contribution: Theory Design, Product Design, Hardware and System Design, Product Experiment and Producing

　

　

. Authenticate Committee Members

Wang Ruiguang: Chairman

Dai Yisong: Member

Liu GuoGang: Member

Zhang Chao: Member

Ji Jingyi: Member

Sui Yongbin: Member

Li Hongbin: Member

　

　

　

<Back